Welcome, Guest

TOPIC: Cascade 2 Hot Water

Cascade 2 Hot Water 2 months 1 week ago #8986

  • Soperp
  • Soperp's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
Hi

Firing up the water heater on my 1991 Swift Kontiki for the first time since taking ownership. The previous owners have drained down the system for the winter.

I can’t get the water to come through the hot tap. Cold is flowing ok. The heater is off, and when I turn the hot tap on the pump starts whirring but nothing comes through. Initially water came out of the drain as the plug wasn’t in tight so it seems to be getting to the heater area. I can’t help thinking I have missed something- a tap or a switch somewhere. The manual refers to a safety switch, but I can’t locate anything.

Any suggestions?

thanks

Pete
The administrator has disabled public write access.

Cascade 2 Hot Water 2 months 2 days ago #8997

  • klyne
  • klyne's Avatar
  • Offline
  • Senior Boarder
  • Posts: 40
  • Thank you received: 7
Pete
I remember having a Cascade on a previous caravan. After long periods of drain down it could be a bit difficult to get the water flowing and sometimes you had to drain and refill the system several times. Have you tried heating the water? Sometimes hot water helps get rid of the air locks in the system. If it only gets luke warm you still have air locks. RE the safety switch. That is more to do with heating the water on 230v and is a safety cut out switch. It is located on the inside end of the boiler under a swing cover held in place with a screw. Release the screw and you will have access to the cut off button, just push in to reset.

David
Bailey Approach 740
www.davidklyne.co.uk
The administrator has disabled public write access.

Most recent motorhome reviews